Sunbeam (Hillman) Imp Water Pump Rebuild

 I bought a kit to upgrade a leaking Imp water pump.  The bolts weren't the same as the original and the shaft nylok nuts weren't even the same thread.

These were the parts that were in the kit that did work.  The fan belt was reinstalled with 1" deflection on the longest run for proper tension.

Seal = 5303290 N8020 S113

Bearing = 6202RS

https://www.rockauto.com/en/partsearch/?partnum=6202rs

Imp Water Pump

I had a terrible time previously obtaining an Imp Water Pump rebuild Kit through US customs the last time.  This time I was determined to obtain the correct parts locally.

The bearings turned out to be a double-sealed variety which are fairly common.
6202 2RS Double Sealed Bearing 15mm x 35mm x 11mm

The seals were a little harder to find, but a tip from a friend led me to look at pool pump suppliers for an AVON type B seal:
16B36

All is back together and working fine.